FREE Shipping



RRP: £99
Price: £9.9
£9.9 FREE Shipping

In stock

We accept the following payment methods


This versatile pin and non-invasive meter is ergonomically designed for easy one-handed operation enabling the measurement of moisture in buildings and other related structures both on and below the surface. Identify the extent of moisture damage, diagnose the cause of the problem and monitor changes in moisture levels The relative moisture level is shown on the digital display and its moisture condition is shown on the accompanying scale of color-coded lights. It is ideal for locating and measuring moisture problems in homes and building materials such as timber/wood, gib board etc. Deep wall probes establish the presence of moisture in wall cavity insulation, sub and surface structures

moisture content, the higher the reading. Any reading which displays an LED in the red zone, is too damp. The The Protimeter Surveymaster (BLD5365) is a newly developed dual mode moisture meter which allows the user to distinguish between sub-surface and surface moisture. A low or no reading will occur if the pins are placed onto a painted or varnished surface. Similarly a covering like vinyl will not hold moisture and provide a low reading. The Protimeter Surveymaster features a digital LCD display supported by the Protimeters revolutionary colour display which is a collection of 60 LEDs divided into color-coded zones signify moisture readings of the material under investigation. The green, yellow, and red color-coded zones indicate the following:To use the Deep Wall Probe, drill two clearance holes 1/4 in. (6 mm) in diameter and approximately 1 1/2 in. (40 mm) apart to the required depth. Non-invasive pinless radio frequency finds moisture at depth where moisture is not always directly visible – up to 3/4 in (25.4 mm) below the surface. The Surveymaster also features a green, amber and red LED light scale which provides the user with a DRY (green), RISK (amber) and WET (red) visual indicator of moisture levels. When using the two pin measurement mode, all you need to do in most applications is lightly touch the pins to the material you're testing (there's no need to fully insert them into the material), minimising the level of damage. The meter detects the actual percent moisture content of wood (in % MC) and converts these results to a wood moisture equivalent (WME) when measuring concrete, dry wall and other building materials. When determining the sub-surface moisture readings, the surveyors can utilise a set of deep wall probes which connect to the Protimeter Surveymaster through the external auxiliary port.

The search mode is used to assess the moisture level beneath the surface of solid walls and floors independently of surface conditions. The Surveymaster2 has two different moisture measurement modes. You can either use the non-invasive scanning mode to test without the need to use any pins, or use the built-in pins at the top of the meter for a more direct measurement of moisture content. This flexible approach to moisture measurement caters for practically any application.

The reading is displayed on the coloured LED bar and the digital display as a percentage from 7 to 99% Wood Moisture Equivalent. Connect the Deep Wall Probes to the instrument and push the two probe rods into the clearance holes. Hold the rods firmly against the base of the holes while taking the reading (see photograph). Measures moisture beneath the surface without drilling holes to a nominal depth of 0-20mm. Hold against the wall to allow a radio signal to penetrate the surface. This is the best method for assessing the moisture content beneath a tiled / covered surface. The relative moisture level of the material under investigation on a scale of 0-999. The Protimeter Survymaster features two displays that are synchronized, a digital LCD display supported by a colour-coded LED scale.

  • Fruugo ID: 258392218-563234582
  • EAN: 764486781913
  • Sold by: Fruugo

Delivery & Returns


Address: UK
All products: Visit Fruugo Shop