Joined in 2023 
82 
63 About this deal
To adjust the channel CH setting on the flash trigger (add 10+ channels) and use the channel which is not disturbed. Or turn off the other 2.4G equipment in working. Press < MODE> Mode Selection Button and three flash modes will display on the LCD panel one by one with each pressing.
As you can see from the comparison, the Yongnuo is still slightly brighter than the TT350F, even when set to ISO800, but that said, the TT350F can still light a fairly large room at ISO800 so it’s achieving what it needs to whilst still maintaining a respectable ISO level. Press the < SLAVE> Button to choose the group from M/A/B/C. Then, press the < MODE >Button so that the master unit can work in OFF / TTL / M flash mode. Choose one of them as the flash mode of master unit. This Flash can work in TTL/M/Multi flash modes when set as a master unit. Any settings for the slave units on the Master Flash in TTL mode will be automatically sent to the slave units. So the only thing you need to do is to setup the master unit for each slave group and all settings will be transferred to the different groups. You can set up three slave groups for TTL shooting.
A Guide to Stunning Butterfly Photography (17 Expert Tips) Silhouette Photography: The Ultimate Guide (+ 22 Tips) Landscape Photography Composition: 17 Expert Tips 22 Cat Photography Tips and Ideas for Beautiful Images
There is a low battery indicator which will allow you to politely get a few more shots before you need to swap out the batteries. Support for TTL autoflash, 1/8000s High-speed sync, Flash Exposure Compensation, multi flash, mamual flash, etc. While this 'might/ seems' to be true for the X-T/ X-Pro cameras, it certainly isn't for the X-E models. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: TT350 is equipped with three modes of operation. The first of them (TTL) allows you to shoot with the use of automatic selection of flash light power and work with all the automatic and semi-automatic modes available in cameras. The second option is manual mode with S1 and S2 mode selection. The third mode - strobe (Multi) is great for taking effective photos at longer exposure times. Flash gun Godox TT350 offers the ability to sync flash with ultra-fast shutter speeds up to 1 / 8000s ( HSS ). This option is especially appreciated by people who want to use the lamp during outdoor sessions, where very often you have to face intense ambient light.
C.Fn Disabling Auto Power Off function is recommended when the flash is used off camera. (C.Fn-ST) Flash Mode: TTL Autoflash Pull out the wide panel and place it over the flash head as shown. The flash coverage will then be extended to 14 mm. Long Press the < SYNC> button for 2 seconds so that < > is blinking. Turn the Select Dial until the < > is displayed on the LCD panel, which means the slave unit. Do not leave or store the flash unit if the ambient temperature reads over 50℃. Otherwise the electronic parts may be damaged. At the heart of the Godox system are a couple of transmitters dedicated to Fujifilm cameras. The X-1TF is a flat design and can take a speedlight on the top, and the XproF transmitter has a sloping surface and a large bright LCD screen. Both units can be used to trigger any of the Godox speedlights or Godox flash heads or a manual flash via a remote X1-R receiver.
Great Deal 
New Comment